Hey everyone, sorry if this has been answered many times, feel free to tell me to search better.
I'm planning on using a Tilton 6000 series throwout bearing in my T5 with 4AN lines. Clutch is a single disc with a dual sprung pressure plate.
Tilton recommends using a 7/8" bore master cylinder so looking at both Wilwood and Tilton options, knowing clearance at the strut tower could be an issue.
I also have a 260 master cylinder I bought from Rock Auto on closeout years ago, but unsure if that will give me the throw and pedal feel I'm after.
What setups have been successful for people using hydraulic bearings like this?
Thanks.
I'm planning on using a Tilton 6000 series throwout bearing in my T5 with 4AN lines. Clutch is a single disc with a dual sprung pressure plate.
Tilton recommends using a 7/8" bore master cylinder so looking at both Wilwood and Tilton options, knowing clearance at the strut tower could be an issue.
I also have a 260 master cylinder I bought from Rock Auto on closeout years ago, but unsure if that will give me the throw and pedal feel I'm after.
What setups have been successful for people using hydraulic bearings like this?
Thanks.