getouttamyway
Member
- Joined
- Apr 12, 2012
- Location
- Oakland, CA
1990 240 with the complete drivetrain from a 1991 940t swapped in. Bone stock except open intake and injectors from an 850. Runs great on stock boost. When I splice in my MBC and turn it up to 10 psi it gets a hard cut around 8-10psi under load, not necessarily WOT though. I can't figure out the problem but I'm reading conflicting numbers on my injectors. Notably the charts show 31lbs/hr but at 3.8bar. any one know if these might be the culprit:
0-280-155-831
They're yellow/orange for reference.
Plugs are BP7ES
0-280-155-831
They're yellow/orange for reference.
Plugs are BP7ES
Last edited: