Marvelous3
Who engineered this?
- Joined
- Nov 12, 2002
- Location
- Atlanta
So, crux of the issue is i am currently dealing with the bolt for the mounting bracket for the tension on the alternator is broken off flush with the block. This is the third time this has happened on my red wagon. I?m not really wanting to timesert it again only for the bolt to break off again in a year or two. Grade 8 bolt didnt seem to help.
Doesn?t someone make a bracket that does away with the sliding tensioner?
Or, can i just move the alternator over to the drivers side? I dont need the ac compressor so is there a way the alternator can take its spot? I can move the wiring nbd. Would really like to free up the passenger side of the motor for this holset I?ve been wanting to swap in.
Doesn?t someone make a bracket that does away with the sliding tensioner?
Or, can i just move the alternator over to the drivers side? I dont need the ac compressor so is there a way the alternator can take its spot? I can move the wiring nbd. Would really like to free up the passenger side of the motor for this holset I?ve been wanting to swap in.