View Single Post
Old 09-30-2008, 07:30 PM   #4
fryea
Board Member
 
fryea's Avatar
 
Join Date: Mar 2005
Location: Tacoma, WA
Default

GREAT writeup. Do you have any pictures, or links to, where one can acquire:
4. 1/8" x 1" flat bar
5. 1/2" x 1/2" square stock
6. 1/4" fine thread male rod end with universal 1/4" clevis pin
7. 36" -3 steel braided line with one end converted to a -4 due to adaptor sizing needs
8. 2 fitings, one -3 with a crush washer for the master cylinder, and 12mm x 1.0 to -4 with a crush washer for the slave cylinder
fryea is offline   Reply With Quote