View Single Post
Old 07-13-2010, 11:41 AM   #25
Chuck W
Board Member
 
Chuck W's Avatar
 
Join Date: Apr 2008
Location: Indpls, IN
Default

Quote:
Originally Posted by Krisverde View Post
I dunno why but I find this confusing, but then again I'm real tired right now hahaha. Ill probably figure it out.


Posted via Mobile Device
You've got to cut the big factory connectors off to use the new connectors. Just leave enough wire hanging out of the factory connector when you cut it off. That way you can ID what color wires go to what on the PCB.

I soldered mine at the bulb holders, but if I ever have to do it again, I may just use the spade connectors.
__________________
'80 264GLE - (B21FT-MS'ed/M46)
'97 854 T5 (Eventually to be 5spd)
'77 242DL (B21F/M45) - SOLD '75 245DL SOLD '85 244GLT DEAD
'83 Tbird Turbo (2.3T/T5/MegaSquirt)
My feedback thread
Chuck W is offline   Reply With Quote