home register FAQ memberlist calendar

Go Back   Turbobricks Forums > Search Forums

Showing results 1 to 50 of 300
Search took 0.09 seconds.
Search: Posts Made By: Dauntless
Forum: performance & modifications 08-17-2015, 12:07 AM
Replies: 66
Views: 16,201
Posted By Dauntless
Does anyone have a good source for M90s?

Does anyone have a good source for M90s?
Forum: performance & modifications 08-16-2015, 08:20 AM
Replies: 10
Views: 4,841
Posted By Dauntless
.

.
Forum: performance & modifications 08-16-2015, 08:20 AM
Replies: 10
Views: 4,841
Posted By Dauntless
I've decided to go with a TD04H-13C. I'm thinking...

I've decided to go with a TD04H-13C. I'm thinking the flow out of the turbine should be adequate as the wastegate port is well placed near the outlet flange, and the engine will be at full load/boost...
Forum: performance & modifications 07-28-2015, 11:42 AM
Replies: 10
Views: 4,841
Posted By Dauntless
Sorry for the late reply, and thanks so much for...

Sorry for the late reply, and thanks so much for the info guys.

I'll try to find a 13G with a flat downpipe flange.

I originally wanted a T3, but I'm worried about spool which is why I thought...
Forum: projects & restorations 07-27-2015, 08:37 PM
Replies: 50
Views: 13,791
Posted By Dauntless
That appears to be the vacuum actuator for the...

That appears to be the vacuum actuator for the EGR valve. Now would be a good opportunity to delete the EGR system if you can get away with it.
Forum: performance & modifications 07-21-2015, 09:18 PM
Replies: 10
Views: 4,841
Posted By Dauntless
TD04 turbine housing questions

Hi guys,

I guess this isn't strictly a Volvo question, but as it relates to Volvo turbos I've posted it here.

I'm looking at using a 13C from a Volvo on my Toyota Hilux. The engine is a 2.4L NA...
Forum: performance & modifications 04-29-2015, 09:13 PM
Replies: 37
Views: 6,777
Posted By Dauntless
Perhaps I'll just ask for max camber with the...

Perhaps I'll just ask for max camber with the current configuration.
Forum: performance & modifications 04-29-2015, 07:24 AM
Replies: 37
Views: 6,777
Posted By Dauntless
Thanks guys. So just confirming, I'll ask for: ...

Thanks guys. So just confirming, I'll ask for:

-1 deg camber
2.5mm toe in
7 deg castor
Forum: performance & modifications 04-27-2015, 07:58 PM
Replies: 37
Views: 6,777
Posted By Dauntless
I've been running the current alignment for a few...

I've been running the current alignment for a few months. How much castor should I ask for?


This is excellent information, thanks!

Toe-in, measured on the wheel rim: 2.3 mm +/- 1.0 mm
tire...
Forum: performance & modifications 04-27-2015, 02:24 AM
Replies: 37
Views: 6,777
Posted By Dauntless
Thanks, this is exactly the information I was...

Thanks, this is exactly the information I was looking for.

I don't think they did. The problem started when I fitted the strut tops myself, and didn't get resolved after a number of alignments. I...
Forum: performance & modifications 04-27-2015, 01:40 AM
Replies: 37
Views: 6,777
Posted By Dauntless
I've been very thorough in making sure nothing is...

I've been very thorough in making sure nothing is loose, I paint marked every single fastner. The only ones that ever come loose are the strut collar nuts. It isn't a clunk, just a sharp bang when...
Forum: performance & modifications 04-27-2015, 12:02 AM
Replies: 37
Views: 6,777
Posted By Dauntless
I don't have a printout, I'm not sure if that's...

I don't have a printout, I'm not sure if that's possible with their equipment. It's just a regular workshop. They were the only two values they had.
Forum: performance & modifications 04-26-2015, 11:40 PM
Replies: 37
Views: 6,777
Posted By Dauntless
I'm not sure why zero toe, that's what they...

I'm not sure why zero toe, that's what they recommended.

I did take the car back and they were unable to correct it. They stated the alignment was within specs and shouldn't be causing a problem....
Forum: performance & modifications 04-26-2015, 11:31 PM
Replies: 37
Views: 6,777
Posted By Dauntless
Thanks guys, how much toe in should I ask for? ...

Thanks guys, how much toe in should I ask for?

Also, as the wheel centering issue occurred after installing the strut tops, would it be uneven camber or castor or both that would cause the issue?...
Forum: performance & modifications 04-26-2015, 08:42 PM
Replies: 37
Views: 6,777
Posted By Dauntless
740 Kaplhenke strut top alignment issues

Hi everyone,

I've been having many issues with my 740's alignment since installing the Kaplhenke solid strut tops.

The local shop did an alignment, and told me the camber is -1.0° and 0 toe on...
Forum: performance & modifications 04-14-2015, 07:29 AM
Replies: 2
Views: 1,586
Posted By Dauntless
Nobody?

Nobody?
Forum: performance & modifications 04-08-2015, 02:45 AM
Replies: 2
Views: 1,586
Posted By Dauntless
Experience with redblock 16v Enem cams?

Hey guys,

Does anyone have experience with 16v Enem cams?

http://enem.se/produkter.asp

Unfortunately I can't get a more specific link than that.

All info appreciated, thanks!
Forum: performance & modifications 02-18-2015, 05:40 PM
Replies: 39
Views: 7,792
Posted By Dauntless
I run a 3" cat and one of these on my 745T: ...

I run a 3" cat and one of these on my 745T:

http://i1146.photobucket.com/albums/o525/vicperfparts/023_zps9feaa91d.jpg

Sounds like this:
<iframe width="640" height="480"...
Forum: performance & modifications 11-13-2014, 07:52 AM
Replies: 25
Views: 4,886
Posted By Dauntless
I know very little about the subject, but I'd...

I know very little about the subject, but I'd assume a single 45 would be too small for a B21. Single 45s were fairly common on Toyota K series engines 1200-1600cc.

My mate had one with a Lynx...
Forum: performance & modifications 11-09-2014, 06:42 PM
Replies: 55
Views: 8,371
Posted By Dauntless
I'd go a 3RZ.

I'd go a 3RZ.
Forum: performance & modifications 11-05-2014, 11:00 PM
Replies: 30
Views: 8,029
Posted By Dauntless
Thanks Doug. Why do you say that? What...

Thanks Doug. Why do you say that? What specifically did you find?

Maybe, but it's had 3000mi oil changes and seems to be functioning.

Because I don't live in the US, so a valve cover gasket is...
Forum: maintenance & nonperformance 11-05-2014, 08:34 AM
Replies: 13
240: 205/65 r15
Views: 2,817
Posted By Dauntless
205/65R15s will fit just fine. ...

205/65R15s will fit just fine.

http://zyrex.org/gallery/d/60488-3/DSCF4368E.JPG
Forum: performance & modifications 11-05-2014, 06:04 AM
Replies: 30
Views: 8,029
Posted By Dauntless
The breather box was replaced about 40,000 miles...

The breather box was replaced about 40,000 miles ago.

I'll run it as is for now. Eventually I'd like to replace the 12mm hose and fittings with 16mm, but they're difficult to find.
Forum: performance & modifications 11-04-2014, 04:33 AM
Replies: 30
Views: 8,029
Posted By Dauntless
Thanks guys. I temporarily removed the top...

Thanks guys. I temporarily removed the top breather hose yesterday as a test. After my 60km daily drive, I got about 30mL from the catch can. Previously I'd get more like 250mL, so I think I've found...
Forum: performance & modifications 10-07-2014, 05:13 AM
Replies: 30
Views: 8,029
Posted By Dauntless
Buying a B20 oil cap and swapping back to a valve...

Buying a B20 oil cap and swapping back to a valve cover without a vent will cost me close to $100 all up, when I factor in the cap, more hoses and fittings, and another valve cover gasket. Ideally...
Forum: maintenance & nonperformance 10-01-2014, 10:39 PM
Replies: 14
Views: 1,522
Posted By Dauntless
I've seen plenty of those lifting tabs broken....

I've seen plenty of those lifting tabs broken. You'll probably be OK, but be careful and keep an eye on them anyway.

Otherwise, make a pair of lifting straps out of flatbar and hold them in place...
Forum: projects & restorations 10-01-2014, 10:32 PM
Replies: 250
Views: 81,726
Posted By Dauntless
Is the front wheel dented?

Is the front wheel dented?
Forum: performance & modifications 10-01-2014, 10:29 PM
Replies: 30
Views: 8,029
Posted By Dauntless
Any particular reason for that? Just cam...

Any particular reason for that? Just cam clearance?
Forum: performance & modifications 10-01-2014, 10:22 PM
Replies: 10
Views: 1,391
Posted By Dauntless
Automotive electrician. Edit: Beat me to it.

Automotive electrician.

Edit: Beat me to it.
Forum: performance & modifications 10-01-2014, 09:09 PM
Replies: 30
Views: 8,029
Posted By Dauntless
That sounds like a plan to me. I was...

That sounds like a plan to me.

I was thinking a short piece of aluminium tube with a piece of aluminium sheet welded over the end, and holes drilled in the sides.

Would it also be worth using...
Forum: performance & modifications 10-01-2014, 07:54 PM
Replies: 30
Views: 8,029
Posted By Dauntless
Thanks for the info. So you don't think there's...

Thanks for the info. So you don't think there's any point trying to fit a baffle inside the valve cover and using my existing setup?
Forum: performance & modifications 10-01-2014, 07:30 PM
Replies: 33
Views: 6,346
Posted By Dauntless
My 240's original exhaust was under axle. I don't...

My 240's original exhaust was under axle. I don't see how it shows lack of talent, it uses less bends than over axle, especially on a lowered car. It also makes the exhaust much easier to remove. The...
Forum: performance & modifications 10-01-2014, 06:51 AM
Replies: 30
Views: 8,029
Posted By Dauntless
Thanks for the info. Where are you suggesting I...

Thanks for the info. Where are you suggesting I screw in a baffle? And where would you place the oil resistant foam?

Do you think I'd get an acceptable result by effectively baffling and...
Forum: performance & modifications 10-01-2014, 04:44 AM
Replies: 30
Views: 8,029
Posted By Dauntless
I don't want to fill my new intercooler with oil.

I don't want to fill my new intercooler with oil.
Forum: performance & modifications 09-30-2014, 11:11 PM
Replies: 33
Views: 6,346
Posted By Dauntless
3", 14x8x4" or similar sized straight through...

3", 14x8x4" or similar sized straight through muffler in the resonator location, under axle, straight out the back. Or if you want some noise, fit a hotdog/bullet in place of the muffler.
Forum: performance & modifications 09-30-2014, 09:48 PM
Replies: 30
Views: 8,029
Posted By Dauntless
The B21/early B23 type? I'm fairly sure they have...

The B21/early B23 type? I'm fairly sure they have an additional ridge to hold in a baffle?
Forum: performance & modifications 09-30-2014, 08:49 PM
Replies: 30
Views: 8,029
Posted By Dauntless
I'm having trouble finding any good information. ...

I'm having trouble finding any good information.

Should I fit some sort of baffle just over the inside of the vent hole? Fitting a baffle to the entire valve cover seems difficult.
Forum: performance & modifications 09-29-2014, 09:56 AM
Replies: 30
Views: 8,029
Posted By Dauntless
Thanks guys. Looks like I'll try some sort of...

Thanks guys. Looks like I'll try some sort of baffle. Any ideas?
Forum: performance & modifications 09-29-2014, 01:19 AM
Replies: 30
Views: 8,029
Posted By Dauntless
I think Ash from DVS had previously ran it on his...

I think Ash from DVS had previously ran it on his track day car, with no issues. It isn't baffled. How would I go about this? Could I get away with some steel wool in the AN fitting?

Mods are 15G...
Forum: performance & modifications 09-28-2014, 11:02 PM
Replies: 30
Views: 8,029
Posted By Dauntless
Catch can, breather hoses and excessive blowby

Hi Everyone,

My 90 745T has a fairly worn out B230FT, and a replacement engine is planned. However, it's my daily driver and I need to keep it running for now.

The engine runs well and makes...
Forum: projects & restorations 08-26-2014, 06:20 PM
Replies: 43
Views: 4,799
Posted By Dauntless
With 10.0 actually.

With 10.0 actually.
Forum: showroom 08-24-2014, 07:50 PM
Replies: 40
Views: 7,601
Posted By Dauntless
How much rolling and trimming were required to...

How much rolling and trimming were required to fit those?
Forum: showroom 08-24-2014, 07:03 PM
Replies: 40
Views: 7,601
Posted By Dauntless
Yeah, so I'm convinced I need 16s. Thanks!

Yeah, so I'm convinced I need 16s. Thanks!
Forum: maintenance & nonperformance 08-20-2014, 08:30 PM
Replies: 6
Views: 874
Posted By Dauntless
That's an excellent idea.

That's an excellent idea.
Forum: maintenance & nonperformance 08-20-2014, 04:57 AM
Replies: 11
Views: 967
Posted By Dauntless
Those compression numbers do seem low, I'd check...

Those compression numbers do seem low, I'd check the testing is being done correctly and try again. I'd expect at least 130psi, probably more like 150.
Forum: performance & modifications 08-20-2014, 03:09 AM
Replies: 9
Views: 1,754
Posted By Dauntless
$10 at the machine shop got me this: ...

$10 at the machine shop got me this:

http://zyrex.org/gallery/d/133182-4/IMAG2229.jpg
Forum: performance & modifications 08-18-2014, 07:45 PM
Replies: 9
Views: 1,754
Posted By Dauntless
Thanks guys. UNF is common, but not on those...

Thanks guys. UNF is common, but not on those sorts of fittings it seems. NPT is rarely used here apart from AN fittings, so I might take the top piece of the catch can to the machine shop and see if...
Forum: performance & modifications 08-18-2014, 06:36 PM
Replies: 253
Views: 62,452
Posted By Dauntless
This is the cause of your mega slow 60ft times,...

This is the cause of your mega slow 60ft times, which have a big impact on ET. With a 15G you should be able to make much more boost while stalling up.

Edit: You said "when I hit the torque...
Forum: showroom 08-18-2014, 09:50 AM
Replies: 447
Views: 128,044
Posted By Dauntless
Nope, steel. Weighs 800kg unladen.

Nope, steel. Weighs 800kg unladen.
Forum: maintenance & nonperformance 08-18-2014, 06:10 AM
Replies: 16
Views: 1,474
Posted By Dauntless
If you did this I assume you have a multimeter....

If you did this I assume you have a multimeter. Use that to check for 12v.
Showing results 1 to 50 of 300

 
Forum Jump

All times are GMT -4. The time now is 06:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.